Thread: 1734 aentr
View Single Post
Old February 9th, 2018, 10:15 AM   #1

Stuwertz is offline
Join Date: Feb 2018
Location: *******
Posts: 17
1734 aentr

Dear sirs ,

One of the 1756 EN2T MOdule communicated to three Ethernet adapters (1734 AENTR) . Normally During running condition every 10 mins Ethernet adapters point bus status and network status flashing red on all the three Ethernet adapters. Then again getting healthy automatically and cycle runs . Then again error came .

Corrective action taken .
1. Network cable healthy condition
1. I replaced and shuffled adapters .
3.three Ethernet adapters powered by three seperate 24 v power supplies
4. I Replaced 1756 EN2T

Need your advise to solve this issue . Thanks.
  Reply With Quote