View Single Post
Old March 7th, 2018, 10:00 AM   #1
Mteller
Member
United States

Mteller is offline
 
Join Date: May 2017
Location: Michigan
Posts: 8
Factory Talk ME Press and hold button

I have added a new button to a HMI(touchscreen). The button is always on the screen and is low(0). When they press the button it goes high(1) and turns green. The button is for a re-work mode. I want it to be a press and hold for 2 sec button. Than turn off once the mech. cycles. It took me some time how to figure out the button than the HMI/PLC tag thing. I see the status change on the PLC side when they press the button. I get the input from the button and we are able to run in re-work mode. I just don't want the button getting press accidently that's why I want to make it a press and hold button.
Thanks
  Reply With Quote