View Single Post
Old August 8th, 2017, 04:23 PM   #21
Doug-P
Member
United States

Doug-P is offline
 
Doug-P's Avatar
 
Join Date: Jun 2003
Location: Pa
Posts: 1,244
Quote:
Originally Posted by Jrivers010 View Post
When working on programming, is it possible that a logic in a lower rung will cause a previously correct (before the later logic was added) rung before it to fault?.
This leads me to believe you're unclear on the PLC scan cycle. A cursory look at the PLC 1 curriculum doesn't mention this subject. Was the scan cycle covered in that unit?

Also PLC boot camp may be useful.
__________________
Let's eat Grandma!

Let's eat, Grandma!

Words are very important, but punctuation saves lives...
  Reply With Quote