View Single Post
Old February 7th, 2018, 04:49 PM   #2
ASF
Lifetime Supporting Member
Australia

ASF is offline
 
Join Date: Jun 2012
Location: Australia
Posts: 2,684
Welcome to the forum!

To use a third-party controller with a Panelview Plus, you need to use the included Kepware OPC server.

You will need to flash the firmware on the HMI, and when you do, select the relevant Kepware drivers to be loaded onto the hardware. Then you'll need to configure the tags in Kepware to be used in FTView Studio.

That's the short version - now that you know what to look for, give it a try and let us know if you need more help!
  Reply With Quote