gbradley
Lifetime Supporting Member
I have a Red Lion Cadet G304K2 HMI that I want to use to communicate with CompactLogix 1769-L30ERM using Ethernet/IP
Is there a tutorial or quick start on setting up Ethernet/Ip?
Do I have to setup the initial programming using the 9 pin serial port?
DO I have to download a driver?
The screen says: INVALID DATABASE
IP Address is not configured and TCP/IP download is disabled
With Mac address listed...
Thanks
Is there a tutorial or quick start on setting up Ethernet/Ip?
Do I have to setup the initial programming using the 9 pin serial port?
DO I have to download a driver?
The screen says: INVALID DATABASE
IP Address is not configured and TCP/IP download is disabled
With Mac address listed...
Thanks