1734-AENT Module Status solid red

Kataeb

Member
Join Date
Jan 2007
Location
www.livelovelebanon.com
Posts
628
Kindly, we have the following module with its Module Status led solid red.
What can we do to solve this?
" POINT I/O EtherNet/IP Adapter Module , 1734-AENT , Rockwell , series A revision 2 "

In the manuals it is mentioned the following probable cause.
If we download its firmware again will it help?
" Firmware fatal error present. [Unrecoverable fault has occurred: Self-test failure present (checksum failure, or RAMtest failure at cycle power).] "
 
we downloaded the firmware, but got below errors. see also attached. what do they mean? thank you

[FAILURE] Device Identity: Error #11002: Unknown Extended Status error code received.
GS=0x01, ES=0x0312
[-------] Device Identity: Error #10005: GetAttributesSingle to Device object - target does not support hardware revision.
Error #11009: Attribute Id not supported.
GS=0x14
[FAILURE] Reset: Error #11003: Unconnected Send timed out waiting for a response.
GS=0x01, ES=0x0204
 
As already stated, the module is "broken", as indicated bu the solid red module status LED....

Replace it and don't waste any more time.
 

Similar Topics

Hi, I just bought a 1734-AENT Series C module (Revision 6.01). I am using RS logix5000 and at site we have a running system with control logix...
Replies
16
Views
8,680
Question on the 1734-AENT/B module (v5). I have a 1769-L35E (V15) and I was working on adding 1734-AENT/B module to the I/O Configuration tree in...
Replies
6
Views
3,570
Kindly, we have the following module. POINT I/O EtherNet/IP Adapter Module , Catalog Number 1734-AENT , Rockwell It is series B and revision 5...
Replies
6
Views
3,422
Good Evening , I have a CompactLogix 1769-L18 ,with a 1734-IE4C beside it and I am remotely adding a 1734-AENT, and on the side of that I am...
Replies
5
Views
2,027
Hi, We are seeing a problem on our Allen Bradley Ethernet Point IO modules (1734-AENT Module) to our L72 controllers, where if there is a network...
Replies
2
Views
2,254
Back
Top Bottom