jimcav
Member
I will try to keep this simple. I have a machine that is running an emerson vfd running in closed loop vector mode. The direction say to to wire the the encoder as follows:
A to pin 1, -A to pin 2, B to pin 3, -B to pin 4
The unit is wired as follows:
B to pin 1,. -B to pin 2, A to pin 3, -A to pin 4
This reverses both channels. What do this do to the motor and or vfd?
Thanks
Jim Cav
A to pin 1, -A to pin 2, B to pin 3, -B to pin 4
The unit is wired as follows:
B to pin 1,. -B to pin 2, A to pin 3, -A to pin 4
This reverses both channels. What do this do to the motor and or vfd?
Thanks
Jim Cav