Flex I/O fault

Phil78

Member
P
Join Date
Apr 2018
Location
Minnesota
Posts
6
So I am working with this system and I have some remote I/O. its connected with a 1794-AENT. At the end of that rack I have an analog card 1794-IF4I/A. About once every three months I am getting a fault on it.

It seems like the card is some how not recognized anymore. Anyone ever run into this before?

attached a pic of the module info screen

system is running rslogix 5000.

faluts.png
 
Last edited:
I have nightmares about trying to keep FlexIO racks connected.
Unplug the modules, and re-seat all of the module base interconnects.... they seem to get stupid often with even the slightest vibration.
 

Similar Topics

S
Power Flex 527 , safety inhibitor fault
Power flex 527 Network based safety drive had faulty and alarm pop up SOS Code internal fault Unable to set or clear the fault manually or...
Replies
5
Views
106
arpus4KM
A
H
PowerFlex 525 fault on Network even in LOCAL control
So our Powerflex 525's are set up to allow REMOTE operation from PLC through network. But if network is lost we want to be able to run in LOCAL...
Replies
5
Views
553
robertmee
R
V
Powerflex 755 - Fault 9
Hello, guys I am having an issue with Pflex 755, when it is stopping the motor, it is going on fault 9 " Transistor Over Temp". Has anyone dealt...
Replies
1
Views
449
alan_505
A
E
Powerflex 525 F109 Fault
I recognize that I need to factory reset the drive and that P053 is my ticket. Problem statement: I can't get passed the fault display to get to...
Replies
5
Views
1,360
joseph_e2
J
ryangriggs
Powerflex 7000 fault: DI Contactor
Hello. We use AB PowerFlex 7000 drives in a pump station. The operator just called to report a fault on one drive: "STATUS: Faulted" "FAULT: DI...
Replies
1
Views
639
jraef
J
Back
Top Bottom