View Single Post
Old August 20th, 2003, 04:43 PM   #8
Eric Nelson
Lifetime Supporting Member + Moderator
United States

Eric Nelson is offline
Eric Nelson's Avatar
Join Date: Apr 2002
Location: Randolph, NJ
Posts: 4,346
I don't know that I would use the term 'lame', but they aren't nearly as good as they used to be. Back when they were 'PLC Direct', they were able to concentrate on one thing... PLCs. Now that they're 'Automation Direct', they have a whole lot more stuff to support, and their support service has suffered. IMO, I think they should have stuck to PLCs ONLY...

I haven't had to connect my laptop to an RS-422 network yet. I have only used the F2-UNICON to connect a few GS2 drives to a DL240. I used RS-232 for the ASCII comms to that PacSci drive.

Your 'transmit high' problem is probably best answered by A-D tech support...

Actually, the FA-ISONET is made by Facts, so maybe THEY could offer a suggestion?


  Reply With Quote