SICK AFM60 Encoder

i did the set up on rslogix, i can view the encoder in controller tags. i m trying to figure out what to do to complete the configuration and how to get the position feedback.
Thank you for your help.
 

Similar Topics

Hi all, I have installed a SICK AFM60A-S4IB018x12 encoder to Allen-Bradley CompactLogix PLC and configured its parameters via AOI provided by...
Replies
0
Views
82
I have a CLV630 scanner successfully communicating with a Micro850 controller (over Ethernet/IP) but I don't know how to convert my scan...
Replies
0
Views
811
Banner , Sick , etc. Slot on Fork Sensors . Do they make them wider than 8.66 " ? Good Morning , I have product that is coming down the...
Replies
3
Views
999
I've inadvertently tick the DHCP box in the sick software and uploaded this in the PLC (Sick FX0-GENT) and now i am unable to connect to it. Is...
Replies
1
Views
982
I'm attempting to sell my SICK IVC-3D demo kit on ebay. It's been taking up room in my office for far too long. Here's the link if there is any...
Replies
0
Views
738
Back
Top Bottom