View Single Post
Old April 19th, 2017, 06:13 PM   #16
United States

unsaint32 is offline
Join Date: Oct 2012
Location: minneapolis
Posts: 361
Originally Posted by dmargineau View Post
Unfortunately, the ADC (Automatic Device Configuration) feature is deployable only over EtherNet/IP on systems at Rev.20 and newer; moreover, it applies only to PF755s Rev.4.01 and newer, PF753s with 20-750-ENETR EtherNet/IP communications modules and PF525s; ADC requires Stratix 5700, 6000 or 8000 series switching for the VFD ADC subnet.

Am I correct in saying, ADC does not "require" Stratix since I can set the correct IP address in the new drive using the keypad and leave the rest to the ADC?
  Reply With Quote