View Single Post
Old December 7th, 2017, 02:04 PM   #1
United States

jkerekes is online now
jkerekes's Avatar
Join Date: Aug 2007
Location: NJ
Posts: 2,192
Dynamically Change ControlLogix Produce/Consume Tag Properties

I usually make a master program that I then use on different processes where the only difference is vessel sizes and setpoint ranges. I have the program look at the IP address of one of its EN2T modules to determine which process its running.

I then have to manually modify the master copy to change certain thing before downloading, such as the processor name and change the consumed processor IP addresses There's no way to programmably change the processor name though. Can I change the Consumed tag IP address in the I/O tree programmably?
  Reply With Quote