Hello all
I was trying to write a program for one application.
In this application at two location of conveyor the dispensers are going to open when the bit in bitshift register is 1 at location 15 and location 14
So we have length of bit is 18.
As I’m testing right now I have used timers in place of conveyor, like index1 timer
Index 1 when the pans is at location 15 no pan at location 14 dispensers shld t work
Index 2 the pan will move to 14 another pan comes in 14 now the two dispensers have to be opened.
Index 3 pan 1 moves to 13, pan 2 to 14, new pan to 15 dispensers shld not work
Index 4 pan 1 to 12, pan 2 to 13 and so on two dispensers shld on
How shld I skip two index every time. I tried using counters and equal block when accum value is equal to 2 then to open dispensers. It worked for first cycle but later one dispenser worked even for index 2 but it shouldn’t
I’m sorry for my English.
Please help me
I was trying to write a program for one application.
In this application at two location of conveyor the dispensers are going to open when the bit in bitshift register is 1 at location 15 and location 14
So we have length of bit is 18.
As I’m testing right now I have used timers in place of conveyor, like index1 timer
Index 1 when the pans is at location 15 no pan at location 14 dispensers shld t work
Index 2 the pan will move to 14 another pan comes in 14 now the two dispensers have to be opened.
Index 3 pan 1 moves to 13, pan 2 to 14, new pan to 15 dispensers shld not work
Index 4 pan 1 to 12, pan 2 to 13 and so on two dispensers shld on
How shld I skip two index every time. I tried using counters and equal block when accum value is equal to 2 then to open dispensers. It worked for first cycle but later one dispenser worked even for index 2 but it shouldn’t
I’m sorry for my English.
Please help me