View Single Post
Old September 6th, 2012, 07:42 PM   #14
jonney
Member
Malaysia

jonney is offline
 
Join Date: Apr 2012
Location: Malaysia
Posts: 12
Quote:
Originally Posted by OkiePC View Post
Working from memory, look under axis configuration. There should be tabs for each of those details you mention. As for the setup in the amp, I think you will need to choose a kW size that meets or exceeds the motor, and custom adjust its current limits also but I think it should work.

I used 1394 systems with A/B resolver motors in most cases, but we did use them with encoder feedback too. IIRC, they had two choices for encoder voltage, 5v and 24v (this may be an s-class memory).
Not GML Commander. I used GML 3.9.1.
In my old program, someone set the Counts/Mtr Rev 10000 or 8192 or else. the encoder is 1024 PPR actually. But the program works,why?
  Reply With Quote