Bill Fletcher
Member
Can you access a CompactLogix PLC for viewing and programming from the other side of an NATR module?
Thanks. Bill
Thanks. Bill
PLC programming through an NATR
- Thread starter Bill Fletcher
- Start date
JasonTheSparky
Member
You can so long as your public and private sides of the NATR are configured properly. You will only be able to see your devices that are mapped through a NATR using your ethernet driver in RSLinx though.
Bill Fletcher
Member
OP
Thanks Jason.
JasonTheSparky
Member
Sure thingSimilar Topics
Hi everyone,
I am wondering how to communicate to a PLC using VB. I currently have a "Click PLC programming module", that I am communicating to...
Dear all,
Does anyone know if it is possible to program the plc via the Siemens Series 8 control..... say from the front D25 socket, as I don't...
Hi, I am trying to set up a plc. I've never done any programming with ladder logic previously. I'm trying to set up a a program to turn a device...
Hello colleagues,
Some time ago I started my adventure with programming. With your help and the courses, things are starting to come together...
Dear All,
I need a sample PLC program to count the output pulse of a mass flow meter so that a specific amount of mass (for example 100gm)can be...
