View Single Post
Old August 10th, 2018, 05:17 AM   #2
Lifetime Supporting Member + Moderator
United Kingdom

daba is offline
daba's Avatar
Join Date: Jul 2004
Location: uk
Posts: 4,483
I would say that only an ON/OFF/ON configuration can provide the information needed by the controller. All 3 positions must not be momentary.

If your broken switch has only 3 lugs soldered into the PCB, then it is a single-pole, if it has 6, then it's a double-pole.

I've gone full-circle with this, and ended up on that same page you linked to...

TL series switch
3 single pole

The rest is up to you to compare against your existing switch...
ControlLogix & SLC Training
a-b train ltd.
tel: 07506 73 9999
nil illegitimi carborundem

  Reply With Quote