James Ross
Member
Hi
We intend to replace our LENZE EVS9326 EP with a Control Technique Unidrive SP. The machine is a simple one; PLC send ABZ pulses to the drive in position control mode to run a Lenze motor with a Stegmann Hiperface encoder. I think we need some extra SM module On Unidrive, I don't know which.
We already have SM Universal encoder plus, an Unidrive SP 1406, as same as same capacity as our Lenze Drive.
Maybe we need other modules.
Anyone with some experience like this.
Best Regards.
James
We intend to replace our LENZE EVS9326 EP with a Control Technique Unidrive SP. The machine is a simple one; PLC send ABZ pulses to the drive in position control mode to run a Lenze motor with a Stegmann Hiperface encoder. I think we need some extra SM module On Unidrive, I don't know which.
We already have SM Universal encoder plus, an Unidrive SP 1406, as same as same capacity as our Lenze Drive.
Maybe we need other modules.
Anyone with some experience like this.
Best Regards.
James