I want to be able to control a Panelview 800 from my laptop screen, whilst running an screen recorder program. so that i can use that footage in editing software, in a picture in picture style screen that would show what the machine would do as the operator would press certain buttons on the HMI. is that possible to control the panelview 800s in that way?
Screen Recording on Panelview 800
- Thread starter JZerb
- Start date
labeledas
Member
From what I am reading it looks like you can test and run in a browser using panelview explorer, but I am not sure if it just runs the test on the actual hmi itself and the browser just initiates it
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711r-um001_-en-e.pdf
The PanelView Explorer feature is only supported on PanelView 800
terminals with firmware revision 2.020 or earlier. It is not supported
from firmware revision 3.011 onwards.
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711r-um001_-en-e.pdf
The PanelView Explorer feature is only supported on PanelView 800
terminals with firmware revision 2.020 or earlier. It is not supported
from firmware revision 3.011 onwards.
Page 96 of the manual located at http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711r-um001_-en-e.pdf shows how to setup vnc. You can then use a vnc client on your PC to view the screens on the Panelview800 via a ethernet connection.
dmroeder
Lifetime Supporting Member
edit: once again I failed to understand the task at hand so I deleted my comment. I had PV+ in my head...
Last edited:
i read that as well, and watched the youtube video Rockwell actually posted as to how to setup the VNC on the Panelview 800s, but wasnt sure if there was another way to accomplish what i wanted.
i didnt read your post but i assume you mentioned something about just running the Test Display in FTVS while connected to the PV+ to control it. I was hoping there was a way to do that was CCW, but i dont believe there is.
dmroeder
Lifetime Supporting Member
You are exactly right, that is where I was headed.
Similar Topics
Good Afternoon,
Many times I will quickly brainstorm an idea on FactoryTalk View , and would like to email it a coworkers , instead of...
I am working on a project using a NB screen and NX1P2 PLC.
I am having a really hard time getting a real number to properly translate through to...
Currently we have a fat( I think that is what it is called) Intouch application. An application resolution of 3840x1080, and inside that 2x...
Hi guys
We're in the process of creating a ME runtime to operate on a PC running windows using a InTouch INDT156 touchscreen, and we're having an...
I have a managed InTouch Application that I deployed changes to through Archestra IDE yesterday. The only changes I made was adding a solenoid...