Powerflex 755 frequency write through studio 5000

vishaldev

Member

V

Join Date

Dec 2020

Location

Ludhiana

Posts

1

• Feb 16, 2021

• #1

How to write frequency to Powerflex 755 drive using ethernet?
I want to give frequency command to powerflex 755 through studio 5000.

 

willxfmr

Lifetime Supporting Member

Join Date

Nov 2013

Location

Wisconsin

Posts

466

• Feb 16, 2021

• #2

If all the hardware is set up correctly, you just have to move the desired speed into the tag for speed reference.

 

mylespetro

Member

Join Date

Dec 2015

Location

NS

Posts

740

• Feb 17, 2021

• #3

I think you'll probably have to set Parameter 545 (Spd Ref A Sel) to come from the network.

 

_Dock_

Member

D

Join Date

Sep 2015

Location

KY

Posts

508

• Feb 17, 2021

• #4

Use the startup wizard it will walk you through all the questions.

 

James Mcquade

Member

J

Join Date

Oct 2007

Location

Nashville, Tennessee area

Posts

3,676

• Feb 17, 2021

• #5

Welcome to the forum.

dock, please explain how to get to the wizard.
james

 

_Dock_

Member

D

Join Date

Sep 2015

Location

KY

Posts

508

• Feb 17, 2021

• #6

James,

See page 41 of this manual.

https://literature.rockwellautomati...re/documents/at/drives-at004_-en-p.pdf#page40