1756 I/O Terminal Blocks

So I am putting a control system together and all my I/O cars are without terminal blocks.

What resource can i use to find out which terminal block goes with which card so i can order?

I have AC and DC digital input and output cards and analog input and output cards.

I want screw terminal in all of them. Is there a book or a guide just for the terminal blocks or will i have to find the manual for each card and look it up there?

http://raise.rockwellautomation.com...ents.asp?CID=72C3572A280E45F48663570989AF2057

http://raise.rockwellautomation.com...ents.asp?CID=5CD7B512C8554344B4344239A358B348

http://literature.rockwellautomation.com/idc/groups/literature/documents/td/1756-td002_-en-e.pdf

Go into this document, search for your module and it should show you which terminal blocks are available.

Although we only keep the
1756-TBCH 36 pin
1756-TBNH 20 pin
which covers our options...

although for new installs we have been buying the 1492-CABLEXXXTBCH wiring harnesses (where XXX is the length) to take the cores down to terminals for much neater wiring.

the links below might be helpful;
http://literature.rockwellautomation.com/idc/groups/literature/documents/td/1492-td008_-en-p.pdf

https://cdn2.rexelusa.com/medias/sy...9192430534686/Allen-Bradley-1492-RAIFM8-3.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/in/1492-in069_-mu-e.pdf