Pv plus 1500
- Thread starter EricD.
- Start date
cereevesplc
Member
Two of us here have the same issue even after following the knowledgebase answers on Rockwell.
What DID work was a complete uninstall and reinstall of version 11.There was a Windows 10 update last week that may have screwed things up with FactoryTalk.
cereevesplc
Member
UPDATE:
It looks like they updated the Knowledgebase article for the issue we were having for creating version 9 runtime files using version 10 or 11 ME. (I’ve been checking on this one every couple of days to see if they have a resolution)
The one that worked for us was setting Vstudio.exe to run in Windows 7 compatibility mode.
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1074294/loc/en_US#__highlight
It looks like they updated the Knowledgebase article for the issue we were having for creating version 9 runtime files using version 10 or 11 ME. (I’ve been checking on this one every couple of days to see if they have a resolution)
The one that worked for us was setting Vstudio.exe to run in Windows 7 compatibility mode.
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1074294/loc/en_US#__highlight
Similar Topics
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Hi there,
Maybe I am overthinking this issue, but here is what I have going on. I have a program running for a water valve on a DI system. We...
I have a stand-alone unit (ser.# 2711P-RDT15C ser. C) that I want to connect to to copy the program. Any ideas on how to? When I say stand alone...
Hi everyone,
i created historian trends, which is working good. Now, is there any way to go to any direct date in past instead of moving left/...
Hi guys. Currently working on a project that requires a Panelview Plus 1500 to read a CSV File (recipe) from a network drive.
The issue I have...
