Tmilleratmetro
Member
Hello All,
Panelview 800 and Micro1400.
Getting Numeric entry to read an INT from PLC, but display as Floating point.
EX. INT in PLC N7:20 == 85
I'd like Panelview800 to read that value as 8.5. If user changes value to 8.7, INT in PLC should read 87.
I can't seem to get the HMI to do this. I've got my num entry properties set to 1 decimal position, tag is configured as 16 bit int. Numeric field width is 4, as largest value I want to see is 999, or 99.9 on PV800.
Does anyone have any suggestions as to what I could be doing wrong?
Thank you!
Panelview 800 and Micro1400.
Getting Numeric entry to read an INT from PLC, but display as Floating point.
EX. INT in PLC N7:20 == 85
I'd like Panelview800 to read that value as 8.5. If user changes value to 8.7, INT in PLC should read 87.
I can't seem to get the HMI to do this. I've got my num entry properties set to 1 decimal position, tag is configured as 16 bit int. Numeric field width is 4, as largest value I want to see is 999, or 99.9 on PV800.
Does anyone have any suggestions as to what I could be doing wrong?
Thank you!