View Single Post
Old January 3rd, 2018, 03:49 PM   #2
sparkytex
Lifetime Supporting Member
Canada

sparkytex is offline
 
sparkytex's Avatar
 
Join Date: Jun 2013
Location: Port Hardy B.C.
Posts: 297
Do I just take the address associated with the m3/Hr flowmeter and divide it by 60 for minutes, then divide by 60 again for a cube per second value, then move it into another floating point address and add it into it self every second using a continuous timer set at .1000?
__________________
Waste Water Automation and Control

Last edited by sparkytex; January 3rd, 2018 at 03:52 PM.
  Reply With Quote