View Single Post
Old November 24th, 2017, 11:41 AM   #2
Lifetime Supporting Member + Moderator
United States

geniusintraining is offline
geniusintraining's Avatar
Join Date: Jun 2005
Location: SC
Posts: 6,157
When you use Flash you can use Bootp and assign the address to the PLC then flash it

Or you can just get a crossover cable or null modem cable for the RS232

Here is a video I did awhile back that may help...

Allen Bradley 1769-L32e setting up Ethernet and flashing CPU

Make sure you dont have both CPU's on the network with the same address
__________________ PLC Communication Cables, PLC Trainers, Fluke Meters, MicroLogix, ControlLogix, Siemens, Allen Bradley and more... all your automation needs... ((NEW)) After Market 1784-U2DHP Allen Bradley USB to DH+ and Gateways
  Reply With Quote