View Single Post
Old June 13th, 2013, 05:54 AM   #2
RMA
Member
Scotland

RMA is offline
 
RMA's Avatar
 
Join Date: Sep 2004
Location: North of Hamburg, Germany
Posts: 2,052
For this sort of thing I always do it the other way round now - create a single display page for the HMI and resrve a space in the PLC memory for this. I then map the data as required in the PLC - much easier than trying to do it in the HMI and you save a load of tags as well (although I believe that's no longer such a problem with WinCC Flex as it was with ProTool).
  Reply With Quote