View Single Post
Old September 6th, 2012, 06:59 PM   #13
Lifetime Supporting Member
United States

OkiePC is offline
OkiePC's Avatar
Join Date: Mar 2005
Location: ENE of Nowhere Oklahoma
Posts: 10,169
Working from memory, look under axis configuration. There should be tabs for each of those details you mention. As for the setup in the amp, I think you will need to choose a kW size that meets or exceeds the motor, and custom adjust its current limits also but I think it should work.

I used 1394 systems with A/B resolver motors in most cases, but we did use them with encoder feedback too. IIRC, they had two choices for encoder voltage, 5v and 24v (this may be an s-class memory).
It's not all the variables I am most concerned with, it's the undiscovered constants.
  Reply With Quote