View Single Post
Unread December 2nd, 2019, 11:26 PM   #1
afeefabdussamed
Member
Saudi Arabia

afeefabdussamed is offline
 
Join Date: Sep 2016
Location: Jeddah
Posts: 24
Connected Components Work Bench Micro 800 PLC Modbus Mapping

Dear all,

In CCW modbus Adress mapping where each adress is configured in modbus mapping option.For example I will be mapping some memory bit or Input Bool signals to 100001 and I am able to read the data from this adress starting from 100001.

Now my issue is I need to write data to Micro 870 through modbus.So for writing bool to Micro 870 which adress should be used?Is it like similiar to reading adress starting from 100001?

Normally in siemens I used to configure holding registers starting from 40001 but here in this I am not able to configure adress from 40001 as it is for word and I cannot segregate to byte.
  Reply With Quote