View Single Post
Old January 13th, 2021, 06:18 AM   #2
rdrast
Lifetime Supporting Member
United States

rdrast is online now
 
rdrast's Avatar
 
Join Date: Apr 2003
Location: South Carolina Lowcountry
Posts: 5,487
You had to give the Adapter module a name, that identifies the rack, then it is just type, slot, channel.


Code:
MyRack:I:Data[2].0  for Input bit 0 on the input card in slot 2,
MyRack:O:Data[3].4  for Output bit 4 on the output card in slot 3
__________________
------------------------------------
How to ask questions the SMART Way!

Look First, Ask Second!

  Reply With Quote