Thread: UKCA marking
View Single Post
Old March 4th, 2020, 01:19 PM   #6
Lifetime Supporting Member
United States

lesmar96 is offline
Join Date: May 2017
Location: PA
Posts: 416
Originally Posted by rQx View Post
Im not 100% sure but you dont have to CE mark your control cabinet seperatly, the machine builder is CE marking the machine and you make sure you build according to IEC 60204 or applicable standard and the machine builder use this in his CE marking
I am unsure about this, but you may be right. Its the time of customer that just tells us what regulations each panel has to meet and we build accordingly so I am not sure about the certification of the entire machine
Whatever you are, be a good one.
  Reply With Quote