View Single Post
Old January 14th, 2022, 11:33 AM   #9
Operaghost
Member
United States

Operaghost is online now
 
Operaghost's Avatar
 
Join Date: Apr 2002
Location: Dallas, TX USA
Posts: 3,703
Maybe try deleting the Ethernet driver in FT Linx Comms Setup. Then re-add it with the encapsulation setting. That will wipe out any history that driver has.

This may require specific versions. I'll try this with some older versions too and see if it works.

If you can't get it to work, I would go ahead and use OPC. I've used that method for years. And by the way, these two methods I've mentioned don't require the RSLinx "gateway" feature. But the OPC method does require a licensed version of RSLinx, not the free RSLinx Classic Lite.

OG
__________________
I despise when people take random quotes and ascribe them to me - Julius Caesar

Last edited by Operaghost; January 14th, 2022 at 11:35 AM.
  Reply With Quote