GaryS
Member
if you are using them to as input to a PLC then I would look at these
https://www.alliedelec.com/m/d/84968557a3aee52c04ad46316c5b6734.pdf
i have used similar on a project that I needed the reference to reset to a known value for startup but they wanted the pot type controls
it worked great you just need to program an up down counter
https://www.alliedelec.com/m/d/84968557a3aee52c04ad46316c5b6734.pdf
i have used similar on a project that I needed the reference to reset to a known value for startup but they wanted the pot type controls
it worked great you just need to program an up down counter