I have a PanelView Plus 1000 with Firmware 3.20.11. Runtime is V5.0. I can only manually add 1769-L18ER V20.19 to runtime target using FTVS V5.0, I am able to use FTVS V6.0 and client will scan tags in test mode. When runtime saved from V6.0 to V5.0 and loaded to panelview tags are not read. Existing runtime has 6 Device Shortcuts connected to Micro 1500, 1400, and 1769-L32 V16. Runtime also contains 41 screens and found out the hard way that a Panelview Plus Standard V9 is not compatible with screen count or more than 1 shortcut. What issues would I run into flashing firmware from 3.20.11 to 5.10.14 or is there a better option to read L18-ER tags?