View Single Post
Old January 12th, 2018, 12:29 PM   #4
Gomez_
Lifetime Supporting Member
United States

Gomez_ is offline
 
Join Date: Sep 2014
Location: California
Posts: 164
Quote:
Originally Posted by kekrahulik View Post
MSF turns the servo off - you're freewheeling.

MSO turns the servo on - back in control. To answer your question about "offset" really depends on the programming. Assuming the servo doesn't rehome or redefine position, the servo should still know it's actual position.

Will a MAM correct things? If the MAM is absolute, probably. If the MAM is relative - no. very programming dependent.
Well said.

I will also add, @rob that the axis itself will have some settings for what action to take during a fault/stop/overload, so double check those as well.

  Reply With Quote