View Single Post
Old July 12th, 2005, 06:16 PM   #5
LJAM
Member
Australia

LJAM is offline
 
Join Date: Nov 2004
Posts: 32
Motors load sharing ?

Gents,

are both motors driving the same load?, if that is the case you should consider "droop control". This techniques is employed in many drive applications. Also many standard VFDs have parameters to help configure the drive for the application (talk to your supplier) ... else, there are tons on information in the net about it.

I am not quite sure what you are trying to do but if load sharing is the application, this might be the answer.

Cheers,
LJAM
  Reply With Quote