atgroff
Member
Doing a project with RIO and have my program wrote and my panels prewired. Some circumstances have changed and I might be able to add another section of RIO to simplify the wiring.
A brief description of what I have:
Main rack with RIO Scanner - which goes to the next rack
Logical Rack 0 Group 0 3/4 Rack - goes to
Logical Rack 1 Group 0 1/2 Rack - goes to
RIO PanelView Logical Rack 3 Group 0 Full Rack
What I need to is add a new RIO rack between the Main Rack and the 1st RIO rack, but I do not want to go back and change all the addresses in my program and rewire my panels. This is what I would have after adding the new RIO rack:
Main rack with RIO Scanner - which goes to the next rack
Logical Rack 2 Group 0 3/4 Rack - goes to
Logical Rack 0 Group 0 3/4 Rack - goes to
Logical Rack 1 Group 0 1/2 Rack - goes to
RIO PanelView Logical Rack 3 Group 0 Full Rack
Will this work or am silly for even thinking that?
A brief description of what I have:
Main rack with RIO Scanner - which goes to the next rack
Logical Rack 0 Group 0 3/4 Rack - goes to
Logical Rack 1 Group 0 1/2 Rack - goes to
RIO PanelView Logical Rack 3 Group 0 Full Rack
What I need to is add a new RIO rack between the Main Rack and the 1st RIO rack, but I do not want to go back and change all the addresses in my program and rewire my panels. This is what I would have after adding the new RIO rack:
Main rack with RIO Scanner - which goes to the next rack
Logical Rack 2 Group 0 3/4 Rack - goes to
Logical Rack 0 Group 0 3/4 Rack - goes to
Logical Rack 1 Group 0 1/2 Rack - goes to
RIO PanelView Logical Rack 3 Group 0 Full Rack
Will this work or am silly for even thinking that?