Hi Guys,
Hoping we still have some Siemens Old hardware Gurus on here.
We are trying to support one of our long time customers. Who have obtained a machine we manufactured some 25/30 years ago.
Plc is S7-200 with no problems.
Problem is the Hmi is an old OP7. All in Russian.
I have the WinCC file that was converted from Pro Tool (but not the Pro Tool file).
I cannot for the life of me establish comms with my PPI or MPI cable.
Am i Missing something or am i doing it wrong.
Regards
Hoping we still have some Siemens Old hardware Gurus on here.
We are trying to support one of our long time customers. Who have obtained a machine we manufactured some 25/30 years ago.
Plc is S7-200 with no problems.
Problem is the Hmi is an old OP7. All in Russian.
I have the WinCC file that was converted from Pro Tool (but not the Pro Tool file).
I cannot for the life of me establish comms with my PPI or MPI cable.
Am i Missing something or am i doing it wrong.
Regards