elevmike
Member
I picked this post up from another forum:
"I'm trying to control a GE drive with a pulse output from the H2-CTRIO module. I've got it configured as CW/CCW, with the outputs into the +A and +B of the auxiliary encoder inputs of the drive, with the common of the drive on CO and C1, but it is extremely erratic and unrepeatable. I think my wiring is wrong, but there are no decent examples in the H2-CTRIO manual. Please help. "
I've never heard of this type of drive control. Am I misunderstanding the question? or is this guy trying to control the drive by inputting to the encoder feedback on the drive? Maybe somebody smarter then me can figure this one out.
Mike.
"I'm trying to control a GE drive with a pulse output from the H2-CTRIO module. I've got it configured as CW/CCW, with the outputs into the +A and +B of the auxiliary encoder inputs of the drive, with the common of the drive on CO and C1, but it is extremely erratic and unrepeatable. I think my wiring is wrong, but there are no decent examples in the H2-CTRIO manual. Please help. "
I've never heard of this type of drive control. Am I misunderstanding the question? or is this guy trying to control the drive by inputting to the encoder feedback on the drive? Maybe somebody smarter then me can figure this one out.
Mike.