View Single Post
Old May 24th, 2018, 03:11 PM   #2
Ken Roach
Lifetime Supporting Member + Moderator
United States

Ken Roach is offline
Ken Roach's Avatar
Join Date: Apr 2002
Location: Seattle, WA
Posts: 14,560
I think the CIP Path for a 1756-L8 controller is simply "2, IP"

The 2 is for the Ethernet port on the front of the controller when used in Ring mode. If you split and use two IP interfaces, they are Ports 2 and 3.

The "1,0" is not necessary at the end of the CIP Path because the message goes directly to the L8, and does not need to go through a backplane port (1) and 1756 Slot number (0) to get to the CPU.
  Reply With Quote