Good Morning, Customer has given me a PAX2D Red Lion timer to read and display the speed of a motor.
The drive only has analog outputs, but the PAX2D is built for high speed pulses. I am just curious if there is a device out there that you could recommend that would take a 0-10V output and covert it into 0-50khz pulses. For example, at 5 volts it would put out 25khz and at 10 volts it would do 50khz. These numbers are for illustration and I don't those exact specs but that is to prove the concept.
If this is not practical, i do have some other options but this would be my first choice. I can buy a PAX2A, but the customer wants the PAX2D because that is what they use all over the plant.
Any thoughts or suggestions?
The drive only has analog outputs, but the PAX2D is built for high speed pulses. I am just curious if there is a device out there that you could recommend that would take a 0-10V output and covert it into 0-50khz pulses. For example, at 5 volts it would put out 25khz and at 10 volts it would do 50khz. These numbers are for illustration and I don't those exact specs but that is to prove the concept.
If this is not practical, i do have some other options but this would be my first choice. I can buy a PAX2A, but the customer wants the PAX2D because that is what they use all over the plant.
Any thoughts or suggestions?