I am working with a Reliance Automax V3 System that uses AB Remote I/O Scanner in the Reliance Rack that connects to AB SLC Digital input and output cards. The system is operating and has been for about 10 years. I am wanting to add another input(there is unused inputs on a Input card) and use it in the Automax ladder logic. I am uncertain on how to do this but from reading the manual I believe I can go to the Variable Configurator in the Remote Rack and select the Group and bit that is unassigned, assigned it a variable name and use it in the ladder logic. The Automax V3 does not seem to use addresses in the ladder logic but variable names that are assigned in the Variable Configurator. I am asking if there is anyone on this site that is familiar with this System. I read the post from this site often and you all are a great help on devices I use but I have not read much about Reliance Automax on here.
AutomaxV3 AB Remote I/O Scanner
- Thread starter bbear
- Start date
Similar Topics
Hi all, recently, I deployed Intouch SCADA to the 7 clients PC, but one PC got pending to update the objects and unable to successful. There is...
Something I've never thought about before... maybe you folks have some thoughts or experience.
I have a customer that uses a Weidmuller, Modbus...
Hi,
We have been facing a issue with SCADAPack 474. Configuration is like below.
RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module
Only...
Hello,
Can anyone recommend an expandible IO module with OPC UA?
I've deployed the Emerson RSTIO-OM module and it works great, but it has a...
So I'm pretty new around here but I come looking for advice or suggestions to research. Im the plant electrician/SCADA guy for a warer department...