omron plc

mahipatsinh17

Member
Join Date
Oct 2012
Location
OHIO
Posts
5
hi i am new for omron plc and i am trying to figure out pid block in plc, i try to make logic and simulate it but
i am not getting any pid output...
the block i use for pid are
PID(190) AND PIDAT(191)

PLEASE HELP
 
got a screen capture of your code?

do you have an always on bit driving the rung to the pid instruction?
 
As I recall, PID doesn't work in the CX-One simulation. The best way to test PID is load the program into the PLC and simulate the inputs with a process meter.
 

Similar Topics

Our plant manger/my boss wants each line to display the takt time above the line. I am trying to research the cheapest way to do this. Our plant...
Replies
3
Views
166
I have PLC Omron CJ2M with OD211 module. I want to use the pulse output and PWM output and this module. But i confuse how to activated this, i...
Replies
0
Views
75
I have a project to control the speed of motor DC using PWM Output on PLC and when im on working i have a several trouble and of of them is the...
Replies
6
Views
168
Hello everyone, I am trying to change the IP address of the Omron PLC (NJ30-1200) and HMI (NB7W-TW01B) to fetch the network on our network...
Replies
7
Views
256
Hi everyone, I am working on a project to protect program memory on Omron CP series PLCs. there is several ways to write protection that i've...
Replies
4
Views
562
Back
Top Bottom