mike3475
Member
Hi, expert:
we have one machine with 6 Sercos axis (kinetix6000) controlled by L71, there are 1756-M08SE and 1756-EN2T and one input module and one output module in the PLC chassis, got int rehome issue during the machine in operation, found one ethernet socket in the ethernet switch has loose connection ,this ethernet socket was plugged in the plant ethernet, so we plugs it into another good socket.
not sure that will solve this issue, does anyone know what will cause if the plant ethernet plug loose.
thanks in advance!
we have one machine with 6 Sercos axis (kinetix6000) controlled by L71, there are 1756-M08SE and 1756-EN2T and one input module and one output module in the PLC chassis, got int rehome issue during the machine in operation, found one ethernet socket in the ethernet switch has loose connection ,this ethernet socket was plugged in the plant ethernet, so we plugs it into another good socket.
not sure that will solve this issue, does anyone know what will cause if the plant ethernet plug loose.
thanks in advance!
Last edited: