Problem in Eplan Electric P8
- Thread starter itsm0s
- Start date
Hi,
Can you please explain more? How can I check the settings for symbols?
I've used metric before, and never had problem. This time maybe units inconsistency is the problem!
Thanks
Patrick,
What do you mean by multi-place trick? Can yoy please explain more? I turned the grid off, but still doesn't work.
the_msp
Lifetime Supporting Member
ivo.maenen
Member
- Join Date
- Nov 2003
- Posts
- 663
Yesterday I imported an backup^-project form V1.9 into v2.5 and had the same problem with the new 'potential-arrows'
( e.g. ---> L1)that I placed.
So maybe that's a reason why this occurs.
( e.g. ---> L1)that I placed.
So maybe that's a reason why this occurs.
amin_black10
Member
Eplan connection problem SOLVED
at first, try turning on "snap to grid" then "align to grid" the symbol that can not be connected. if It didn't work, then the problem is caused by the measuring unit. the difference between Inch and mm. you might have checked mm when u installed the software and now you are using Inch
go to option>setting>user>display>check mm box
and
option>setting>user>graphical editing and put grid sizes to 1, 2, 4, 8, 16 from A to E respectively
Done!
you can now use auto connection
I spent 2 days on the sentences above
at first, try turning on "snap to grid" then "align to grid" the symbol that can not be connected. if It didn't work, then the problem is caused by the measuring unit. the difference between Inch and mm. you might have checked mm when u installed the software and now you are using Inch
go to option>setting>user>display>check mm box
and
option>setting>user>graphical editing and put grid sizes to 1, 2, 4, 8, 16 from A to E respectively
Done!
you can now use auto connection
I spent 2 days on the sentences above
ProcessControlsEng
Member
here is also a bug you should consider (at least it is a problem on Eplan 2022 Update 7).
When choosing inches as a unit for pages the default grid size for P&I pages becomes 0.0984 In which is not in the user defined grid sizes. Make sure your user defined grid size is the same as your default page grid size. Otherwise certain symbols have issues autoconnecting.
When choosing inches as a unit for pages the default grid size for P&I pages becomes 0.0984 In which is not in the user defined grid sizes. Make sure your user defined grid size is the same as your default page grid size. Otherwise certain symbols have issues autoconnecting.
Similar Topics
Hello friends,
I have one problem in Eplan drawing.
when i duplicate or insert and device/DT then its tag name shows - (called prefix) another...
Hi,
I am having a challenge installing a new drive ACS355-03E-44A0-4 as it keeps on displaying Fault code F00018 even when the load is not...
I have an issue on my vessel, we have water tight door system created in China, company is no longer operating. We have 7 doors each with their...
Hi all.
Simple as simple can be, I don't understand what's happening.
I'm toggling he OSR on, GX_LUB_PUMP1_LEAD should switch. It doesn't.
The...
Hi;
In a cabinet of a machine, a Fatek PLC with an Ethernet communication card is working. In the same cabinet, there is a 1 kW inverter. When...