I have been searching past posts and manuals and I'm not understanding the mapping process.
I have a SLC5/03 with a PanelView 600 and 1747-SN RIO that I am trying to re-program.
The short version is the slc does respond to the PanelView <F2> key as I:1/2. And the old ladder logic includes I:1/32, but no description. But I can't get slc input I:2/10 to pass validation in the PanelBuilder32 tag editor. I have tried I:1.2/10, I:1.20/10, I:0.02/10. The errors that I get are 'slot number does not match other tags', and 'tag does not have a valid address in the terminals assigned discrete rack'.
Some details: the PanelView 600 is cat #2711-K6C1, Color Key, FRN 3.00-3.09, possibly upgraded to 4. Physical RIO, RS232, Protocol RIO, DF1.
The SLC is #1747-L532E, 5/03 CPU, 16k memory, OS 302 series C.
The chassis is #1746-A13, 13 slot rack.
The scanner is 1747-SN RIO, in the left-most slot, after the CPU. Adv Config shows 32 scanned input words, 32 scanned output words. The G Data shows Group 0 checked, as Device #1, I/O words 0 through 7.
There are 5 of 16 point input cards labeled slot 2 through 7, and 5 of 16 point output cards labeled 8 through 12. The I/O seem to all map correctly in the ladder programming.
Somewhere I am missing the meaning of chassis, rack, slot, group, and word.
Can someone please point me in the right direction ?
I have a SLC5/03 with a PanelView 600 and 1747-SN RIO that I am trying to re-program.
The short version is the slc does respond to the PanelView <F2> key as I:1/2. And the old ladder logic includes I:1/32, but no description. But I can't get slc input I:2/10 to pass validation in the PanelBuilder32 tag editor. I have tried I:1.2/10, I:1.20/10, I:0.02/10. The errors that I get are 'slot number does not match other tags', and 'tag does not have a valid address in the terminals assigned discrete rack'.
Some details: the PanelView 600 is cat #2711-K6C1, Color Key, FRN 3.00-3.09, possibly upgraded to 4. Physical RIO, RS232, Protocol RIO, DF1.
The SLC is #1747-L532E, 5/03 CPU, 16k memory, OS 302 series C.
The chassis is #1746-A13, 13 slot rack.
The scanner is 1747-SN RIO, in the left-most slot, after the CPU. Adv Config shows 32 scanned input words, 32 scanned output words. The G Data shows Group 0 checked, as Device #1, I/O words 0 through 7.
There are 5 of 16 point input cards labeled slot 2 through 7, and 5 of 16 point output cards labeled 8 through 12. The I/O seem to all map correctly in the ladder programming.
Somewhere I am missing the meaning of chassis, rack, slot, group, and word.
Can someone please point me in the right direction ?