In 1993 I did all the programming and commissioning of the Roller Heart Kiln for porcelain tableware firing at 1400ºC, which appears on page 3 of this document:
44 meters long, 32 burners, 12 temperature regulation zones, 5 atmosphere regulation zones, variable roller speed in 4 sections, and the material transport system.
The PLC was Mitsubishi A2S and everything programmed in Ladder with Medoc in DOS.
44 meters long, 32 burners, 12 temperature regulation zones, 5 atmosphere regulation zones, variable roller speed in 4 sections, and the material transport system.
The PLC was Mitsubishi A2S and everything programmed in Ladder with Medoc in DOS.