2D Data Matrix - separating out data

tspisak

Member
T
Join Date
Aug 2005
Location
Corning, NY
Posts
72
Has anyone read a long 2D data matrix (200+ characters) and separated out the data in to different fields (~twenty)?

I plan on adding a comma to indicate the start of a new field but I don't know where to start programming. The data is a recipe so the data types for each field will stay the same from code to code but the length will not (long and short strings).

I am using a Keyence SR-651 barcode scanner connected to a A-B CompactLogix processor via Ethernet IP.

Any tip on getting started?
 

Similar Topics

Sparky
Data matrix reader configuration
What kind/brand of 2D data matrix readers are the easiest to set up and communicate with CompactLogix PLC? I'm looking to install and setup...
Replies
4
Views
2,208
Sparky
Sparky
M
Sending data from Simotion Control unit (C230-2, C240-2 and D435-2) to Microsoft Azure
Hello everybody, I'm currently working on a project where I need to implement an IoT platform based on Microsoft Azure Cloud. Communication is...
Replies
2
Views
56
JRW
JRW
A
WinCC C-script Raw data operation.
Hello. I have a db which is 1000 INT, and this db is represented in WinCC as a raw data type set of 5x 400 Bytes. This set is read with a script...
Replies
1
Views
78
AdamF
A
K
Need Help Modifying Citect Scada Historical Trend Variable Data
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
Replies
0
Views
64
kreamsippycup
K
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
176
bkottaras
B
Back
Top Bottom