All,
This is my first time test and attempting to establish a DHRIO connection in my career, I am attempting to upgrade the main processor in the plant I work for and I am attempting to get the main Panelview to talk to the new processor. I read in the allen bradley manual that I would need and 82 ohm resister to allow the communication between the PLC and Panel. Would I place this resister on both ends of the cable connection?
Thank you for your insight
This is my first time test and attempting to establish a DHRIO connection in my career, I am attempting to upgrade the main processor in the plant I work for and I am attempting to get the main Panelview to talk to the new processor. I read in the allen bradley manual that I would need and 82 ohm resister to allow the communication between the PLC and Panel. Would I place this resister on both ends of the cable connection?
Thank you for your insight