irondesk40
Member
Being forced to switch to a new windows 10 pc at work. Have quite a few machine projects that i used a compact logix L24ER PLC and they was programmed as version 23.
From what i can tell Rockwell does not confirm that version 23 will work with windows 10, they only confirm on the Rockwell web site that version 24 works.
Most of these machines are in Asia and Honduras. I know i can open and save the program as a version 24 and redownload into the plc's, but at the moment none of these machines are on a network.
Has anyone used a Windows 10 pc on a version 23 project?
Thanks
From what i can tell Rockwell does not confirm that version 23 will work with windows 10, they only confirm on the Rockwell web site that version 24 works.
Most of these machines are in Asia and Honduras. I know i can open and save the program as a version 24 and redownload into the plc's, but at the moment none of these machines are on a network.
Has anyone used a Windows 10 pc on a version 23 project?
Thanks