RBergmann
Member
Although I've been programming for quite a few years, I'm not a long time AB programmer. Had projects here and there (SLC500, MicroLogix). I've tried to avoid them. Cost reason's mostly.
But for the past year I've been involved with CompactLogix quite a bit. Really impressed with using Ethernet/IP to control the PowerFlex 525.
What I'm currently looking for is to identify the an input parameter, via Ethernet/IP, that will give me the drive's output current.
But for the past year I've been involved with CompactLogix quite a bit. Really impressed with using Ethernet/IP to control the PowerFlex 525.
What I'm currently looking for is to identify the an input parameter, via Ethernet/IP, that will give me the drive's output current.