View Single Post
Old October 9th, 2019, 01:18 PM   #1

DairyBoy is offline
Join Date: Jun 2007
Location: UK
Posts: 380
Adding comments to tags in TIAv13p

I'm using a global DB as the i/o for some FBs (thank you, JesperMP). As I only need six bits for each FB I started with a byte as the input/output format, but the individual bits within the byte cannot be commented. An array of 8 bits is the same. So when I use the DB entry in the program as the address for an XIC for example, instead of showing something like "Valve 1 Open", all I can get is "Interface"."01V1".%X0 which has no useful meaning. Is this a limitation of the TIA or my brain?

  Reply With Quote